• Simple, Heavy-Duty Steel construction
• Mounted at an Ergonomically correct height of 37", thus minimizing back strain
• Designed for use with 1/2" flexible vacuum hose connected to a Vacuum Pump and Air Tank with min. 10-gallon capacity (not incl.)
• The QUAD VAC system is designed with adequate space for placement of air tank and pump in rear of assembly on the steel floor plate. (see later photos)

The complete Quad Vac Plus System

Cost: $1,400 (shipping extra)

Foot Orthotic Vacuum Station w/ Latex Cover

Cost: $400 (shipping extra)

The QUAD VAC PLUS includes the QUAD VAC and the additional feature of the heavy-duty 16" x 12" FOOT ORTHOTIC VACUUM STATION (removable) with the durable 3mm latex bladder sheet.

Now available in 15" x 18" (inside dimensions) size to allow for "two cast pulling" at the same time for only $450.00.

The Original Quad Vac Setup

Three Vacuum Plates incl. w/ Quad Vac

Cost: $1,000 (shipping extra)

QUAD VAC INCLUDES:

• Steel Floor Plate (30" x 36")
• Pedestal -- (size 14" x 12") with 2 Horizontal Vacuum Stations and 2 Central Vertical Vacuum Stations
• Sturdy Cast Holding Pins
• 4 sealed vacuum stations
• Three Vacuum Plates: 9" x 15" rectangular (foot orthotics); 10" round and 7" round (blister molding)

Both the QUAD VAC and the QUAD VAC PLUS are designed to be used with the large, 30" x 36" steel floor plate (as shown). However, if exclusion of the floor plate is desired (subtract $175 from price), the system may be secured directly to the floor through the pedestal with four long bolts (not included).