Pyramid PYR-SL-R-TI from Prosthetic Design

Content provided by The O&P EDGE
Current Issue - Free Subscription - Free eNewsletter - Advertise

The Pyramid PYR-SL-R-TI is the newest addition to Prosthetic Designís Pyramid line. It features a 12.7mm (1/2) slide off center, with closed ends on the base and offers 360 degrees of rotation, and a low, 16.25mm profile. The PYR-SL-R-TI is manufactured of titanium and is compatible with the European 4-hole pattern. The rotation is locked into place by tightening the 4 adjustment set screws on the interfacing component, similar to PDIís PR-SL-R-TI. Rotation is positively controlled in 3 degree increments with the use of interfacing radial serrations. The slide is locked at the same time the 4 adjustment set screws of the interfacing component are tightened.

Prosthetic Design Inc.
800.459.0177
www.prostheticdesign.com

Bookmark and Share