Pylon. A rigid member, usually tubular, between the socket or knee unit and the foot to provide support.
Rigid Dressing. A plaster wrap over the stump, usually applied in the operating or recovery room immediately following surgery, for the purpose of controlling edema (swelling) and pain. It is preferable, but not necessary, that the rigid dressing be shaped in accordance with the basic biomechanical principles of socket design.
Early Prosthetic Fitting. A procedure in which a preparatory prosthesis is provided for the amputee immediately after removal of the sutures.
Modular Prosthesis. An artificial limb assembled from components, usually of the endoskeletal type where the supporting member, or pylon, is covered with a soft foam or other light material shaped and finished to resemble the natural limb.
Definitive, or "Permanent", Prosthesis. A replacement for a missing limb or part of a limb which meets accepted check-out standards for comfort, fit, alignment, function, appearance, and durability.
Check or Test Socket. A temporary socket, often transparent, made over the plaster model to aid in obtaining a proper fit.
The electronic version of this manual is presented by Dankmeyer, Inc., with the permission of the authors. This manual may not be redistributed in any form. In order to obtain printed copies of the manual for personal use or distribution, please go to the ordering information page.